Sterling Silver-Filled Product Testing

by Sandra Lupo, Metalsmith, Jewelry Designer and Instructor Exclusively for Fire Mountain Gems and BeadsĀ®

Sandra Lupo used, tested and analyzed sterling silver-filled components and wrapping wire. Here are her discoveries and results.

Earwires:
Test Notes Conclusion
Tarnish by Wear: This product will tarnish over time. These earwires are suitable for any and all designs
Durability: Ring opens and closes repeatedly with springiness (not brittle).
Oxidizing: Consistent color (with liver of sulfur and Cool Tool Patina Gel nuggets in warm solution).
Polishing/tumbling: Color was mantained; finish was lustrous.
Allergic reaction: No reaction (worn by someone who is typically allergic to plated metals).

Jumprings:
Test Notes Conclusion
Size: Accurate measurement using the brass slide gauge. This jumpring mix is suitable for most chainmaille applications and generally connecting and linking.
Shape: Round, accurate 18 gauge thickness with brass slide gauge.
Flush ends: Very clean--no burrs.
Wire manipulation: open/close well.
Work-hardening: Work-hardens slightly less than sterling silver.
Soldering: Not Using stick solder, flux and butane or propane. Solder flowed but ring surface became rough like skin and reddish. Surface appeared, as with firescale.

Round Wire:
Hardness Test Notes Conclusion
All Tempers: Work-Hardening (Hammering): Tested, 18 and 22 gauge wire. 18 gauge--surface performs well (no cracks) when a small simple loop or spiral is made. 22 gauge--surface performs well (no cracks) when a small simple loop or spiral is made. Work-Hardening performs the same as sterling silver applications.
Oxidizing: 18 and 22 gauge spirals were oxidized with liver of sulfur or Cool Tool Patina Gel. Compared to similar sterling spirals, the sterling silver-filled performed just as well. Oxidizing performs the same as sterling silver applications.
Polishing/Tumbling: Brass polishing and tumbling on sterling silver-filled spirals performed as well as similar sterling spirals. Polishing/Tumbling performs the same as sterling silver applications.
Dead-Soft Wire: Wire manipulation: 30, 28 and 26 gauges dead-soft can be crocheted. Dead-soft silver-filled wire in 18, 22, 26 and 28 sample sized were generally good for the various applications suited for thin or thicker gauges. Compared to sterling silver, this sterling silver-filled wire could be substituted for the sterling and would do well in wireworking designs.
A sample spiral was made in 18 and 22 gauges. Both 22 and 18 gauges performed well in being spiraled and forming small circles.
Half-Hard Wire: These wires have been tested only for their springiness versus the dead-soft wire. They spring just as much as sterling silver half-hard wires. Half-hard wire should have the same results as sterling silver applications and can be tested at a later date.
Full-Hard Wire: These wires have been tested only for their springiness versus the dead-soft and half-hard wire. They spring just as much as sterling silver full-hard wires. Full-hard wire should have the same results as sterling silver applications and can be tested at a later date.

Note: Sterling Silver-Filled--items are made by combining a durable outer layer of sterling silver (.925/20) surrounding a copper-alloy core. Use care when polishing, tumbling and/or soldering this product as the inner copper-alloy core may become exposed. For best results, testing these applications is recommended.

Additional Resources

How did you like this resource? Your feedback helps us provide resources that matter to you most.